Wintv Application Windows 7

New product installs:

If you have recently purchased a new WinTV product and your WinTV v8.5 Activation Code has never been used, you can install WinTV v10 with this code. This only applies to unused WinTV v8.5 Activation Codes.

WinTV v8 application and TV tuner driver download package. This WinTV v8, which can be used if you have a WinTV v7 CD-ROM or a WinTV v8 Activation Code. This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v8 application. WinTV v10 is the new TV application from Hauppauge. For TV in a window or full screen on Windows 10, 8 and 7. It has a new look and new features, plus support for WinTV Extend. New features include 4-tuner Picture-in-Picture (PIP) with the WinTV-quadHD, and 2-tuner PIP for the WinTV. A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you have a WinTV v7.2 CD-ROM with Extend. Download the Windows driver above. Double click the downloaded driver. This will install the WinTV-HVR Windows driver. At the completion of the driver install, you should see a message which says Drivers have been updated successfully. At this point, the Windows.

Installation notes for WinTV v8:

Activation for this version of WinTV v8 is done with the WinTV v8 or WinTV v8.5 Activation code or your WinTV v7 CD-ROM.

If you have a Hauppauge WinTV-HVR-930C (16xxx), Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1100, WinTV-HVR-1300, WinTV-HVR-1400, WinTV-HVR-3000, WinTV-HVR-4000 or WinTV-NOVA-HD-S2, you MUST use WinTV v8. WinTV v8.5 does not support these products.

If you are a current WinTV v7 user who does not have your original WinTV v7 CD-ROM but would like to update to WinTV v8, you can purchase a new WinTV v8.5 Activation Code on the Hauppauge webstore. This can then be used to activate WinTV v8.

WinTV v8 application and TV tuner driver download package

This WinTV v8, which can be used if you have a WinTV v7 CD-ROM or a WinTV v8 Activation Code.

This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v8 application and utilities.

WinTV v8 installer
For Windows 10, 8, and 7

File name: wintv8setup_35167.exe | File size: 108 MB | Date: March 15, 2019
Release notes |

To install the WinTV v8 application

Note: You will need to have your WinTV v8 Activation Code to complete this installation. If you do not have a WinTV v8 Activation Code, you can either buy one on the Hauppauge webstore for $9.95, or if you have a WinTV v7 CD, you can download and install the latest version of WinTV v8 application.

Wintv 7 Free

• Download the WinTV v8 installer to your PC. After downloading this file, it's normally saved in the Download directory on your PC
• Insert your original valid WinTV v7 CD
• Run wintv8setup from the Download directory on your PC
• At Activation required, click Check WinTV CD if you have a WinTV v7 CD

This will complete the driver and application installation for your WinTV.

To install WinTV v8 on a PC or laptop without a CD-ROM drive

If your PC or laptop does not have a CD-ROM drive, do the following:

• At the conclusion of the installation a dialog box will pop up saying 'Activation required'
• Click Enter Product Code
• You will find the Product code on your WinTV v7 Installation CD
• Enter the Product code including dashes and dots

To find your Product Code

Look at the following guide for finding your product code

If you have a WinTV v7.2 CD-ROM with Extend, the latest version of WinTV v8 with Extend will also be installed.

Keyboard Control in WinTV

• Next Channel Plus (+)
• Previous Channel Minus (-)
• Increase Audio Volume 'Page Up'
• Decrease Audio Volume 'Page Down'
• Mute 'Ctrl + M'
• Enter Preset Number '0 - 9'
• Show Channel List 'Ctrl + L'
• Make Snapshot 'Space Bar'
• Show Now/Next 'Ctrl + O'
• Display Stream Details 'Ctrl + D'
• Subtitles on / off 'Ctrl + S'
• Change Aspect Ratio 'Ctrl + A'
• Pause Live TV 'Ctrl + Q'
• Continue Live TV 'Alt + P'
• Skip Ahead 'Ctrl + F'
• Skip Back 'Ctrl + R'
• Jump to Live Position 'Ctrl + C'
• Full Screen 'Ctrl + W'
• Exit Full Screen 'Esc'
• Start TV 'Alt + T'
• Start Recording 'Alt + R'
• Stop Recording / Playback 'Alt + S'
• Open File for Playback 'Alt + F'
• Open WinTV Settings Dialog 'Ctrl + I'
• Exit Application 'Alt + F4'

Where can I find the manual for WinTV?

In WinTV v8, right click your mouse in the live TV window, and go to Help. You will see our online manual.

You can also find the manual on our website in the Support -> WinTV v8 under the Manuals tab.

What do I need to upgrade the WinTV application from the Hauppauge website?

In order to upgrade to WinTV v8.5, you must have your WinTV v8 Activation Code. If you do not have an Activation Code , but you have a WinTV v7 CD, you can install the WinTV v8 application (look in the Support -> WinTV 8 Download tab).
If you do not have either a WinTV v8 Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8 Activation Code on the Hauppauge webstore for $9.95. The WinTV v8 Activation Code can then be used to activate WinTV v8.5

How do I rescan channels?

In WinTV v8, click on the setting button (Gear) in the lower left of the application. Then click on the Devices tab and highlight your WinTV device and click Tuner Setup (see the first picture below).

In the Device Setup Wizard, you will see a list of TV formats which your Hauppauge TV tuner can support. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs (see the second picture below). You can also select all formats and let the WinTV application show you what it finds in each format (if anything).

Click Next and Next and let WinTV scan for channels. The results should look like picture 3 below.

Settings -> Devices

click to enlarge

Device Setup Wizard

click to enlarge

Scan Complete

click to enlarge

I selected a channel but I just see 'buffering' in WinTV. Also there is no TV, just a blank screen

Buffering and no TV video can be caused by a few things:

• If there is a problem with your TV signal. Check your antenna or coax cable going to the Hauppauge product.
• If your anti virus software is preventing the WinTV application from making a temporary video buffer. If this is the case, you'll need to either disable the anti-virus software or create an exception for the WinTV application in your anti-virus exception list.
• If you using a cable TV or satellite box, make sure the box is turned on.

I scanned for channels, and some were found, yet I do not see any channels listed in WinTV's channel list. What did I do wrong?

If you see channels during the scan, but no channels are listed in WinTV channel list (to see the channel list, right click your mouse on the live TV window, then select Find Channel), then something went wrong in the WinTV TV channel database.

Solution:

• Uninstall WinTV completely: go to start/control panel/ and look for Program and feature and uninstall Hauppauge WinTV.
• After that please restart the computer.
• When the system comes back up please browse to the following folders and if you see a WinTV folder, delete the folder.
  • C:UsersPublic
  • C:Program Files or Program Files (x86)
  • Also please go to this folder which is a hidden folder and delete the Hauppauge folder: C:ProgramData
    Information on how to show hidden folders in Windows: Show Hidden Files and Folders in Windows 7, 8.x, 10, or Vista http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
• Once you do this you can reinstall Hauppauge WinTV with latest version from website.
• Now if you scan for channels, you should see them in the WinTV application.

Our local TV channel switched frequencies today. I've been unable to get the rescan to work. I can find all the channels on the rescan but can't seem to save them in the database.

We recommend that you delete the WinTV channel database before you re-scan for channels, especially if you think that your channel line up has changed. To do this, close the WinTV v8/v8.5 application and then run this program:
c:Program Files (x86)WinTVWinTV8WinTV8.exe -emptydb

I'm trying to schedule a recording with TitanTV, but the scheduled recording does not show up in the WinTV Scheduler

The channel list in TitanTV must match the channel list in WinTV. If, for example, you scanned WinTV with an over-the-air antenna but selected a cable TV line up in TitanTV, your channel line will be different and scheduled recordings will fail.

To understand why this happens, lets look at how the process of clicking the record button in TitanTV and how this turns into a WinTV Scheduled recording. When you click the red 'record' button in TitanTV, Titan delivers a .tvpi file to your PC which contains the details of the recording (channel number, channel name, time, date, etc.). But if the channel number doesn't match a channel which WinTV can tune to, WinTV ignores this attempt to schedule the recording and you will not see this scheduled item in the WinTV Scheduler.

There is a log file saved at c:userspublichauppauge wintvlogswintvtvpi.txt which shows the details of an attempt to schedule a TitanTV recording. Click here to see a sample of this information.

How can I save my WinTV Channels database?

To avoid having to rescan for TV channels, you can save the list of channels you are using. This is called Saving the WinTV Channels database.

To save your channel database go to:

C:UsersPublicWinTVChannel Database (Windows 7 and Vista)

C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)

Copy the hcwChanDB_5 file to a place for safe keeping. To replace saved Channels just copy HcwChanDB_5 back to Channel Database Dir.

How can I reorder or change the channel numbers in WinTV?

Open the Settings menu in WinTV v8 by clicking on the “gear” button in the lower left hand corner of the WinTV application. Then click on the “All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.

Example:
You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:

• click your right mouse button on 2704 in the All Channel list
• change the Preset to 702
• change the Name of the the channel to WNBC

  Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.

Where can I find my recorded files?

Windows 7 Applications Download

The default directory for recorded files is:

C:UsersPublicVideos

You can change the default directory in WinTV v8 by clicking on the “gear” button, then the Capture tab. Here you will see the Recordings Directory.

In Windows XP, files are recorded to:

C:Documents and SettingsAll UsersShared DocumentsMy Videos

Can I record TV shows with subtitles or closed caption?

Can I view and record my game play from external game sources with WinTV?

WinTV v8 Installation Problems

Some virus software will prevent the WinTV application from completing the installation. If you find this, you will need to temporarily disable the virus sofware.

Here are a couple of virus applications and how to disable them:

• AVG: 1) Right-click the AVG icon in the system tray next to the clock. 2) Click Temporarily disable AVG protection. 3) Choose how long you want the protection to be disabled and whether to disable the Firewall as well 4) then click OK.

Hauppauge Wintv Download Windows 10

I am getting a black screen in WinTV, or I'm seeing choppy video images. What can cause this?

There are two main reasons why you might see a black window:

TV Signal strength:. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.

Graphic display adapter related: The video graphics acceleration mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in “Use hardware acceleration when possible”.

If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).

What video format will WinTV record in?

There are two types of recordings WinTV v8 will make: recordings from digital TV and recordings from analog TV.

Recordings from digital TV (ATSC, DVB or QAM) stay in the original digital TV format and in the original video quality. WinTV will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV Configuration menu.

When recording from analog TV (NTSC or PAL), recordings are made using MPEG2. You can choose the quality of your analog recordings in the Settings menu under Capture and then Default Analog Recording Quality.

What software can I use to edit & burn the recorded files from WinTV?

When recording digital TV, all recordings are made in whatever format your digital TV is being transmitted in. For example, ATSC is transmitted as MPEG-2 and therefore WinTV recordings will be MPEG-2. The files will be .TS files.

When recording from analog video or analog TV, WinTV will record MPEG-2 video using a .TS format. To edit your videos, you can use any software editor that can work with .TS files or MPEG-2 files

What file size will the recorded videos be?

Wintv Windows 10

Digital Broadcasts (ATSC or QAM)

The file size of a digital signal capture depends on the bitrate of the digital signal. The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for ATSC & QAM recordings range from approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.

Analog TV or analog video

The WinTV application converts analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:

Best - Approx 1 Hour+
Better - Approx 1 1/2 Hours
Good - Approx 2 Hours
Fair - Approx 3 Hours

How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV?

On those WinTV products with FM radio, you can scan for FM radio channels:

• click the Setup button (gear button) on the lower left hand side of the WinTV app
• click the Device tab
• Choose your WinTV product, and then click Tuner setup
• you should see a list of video and audio sourcs available on your Hauppauge TV tuner. Click Analog FM Radio and then Next
• under Stations, select either Automatic Scan if you want the WinTV application to scan for FM radio stations, or Manual Entry if you want to enter your FM radio stations one at a time
• then click Next to start the FM radio scan
• the scan is complete when the message Scan complete is displayed
• click Next and Next and you will be back to the main WinTV application
• to select your FM radio channel, right click your mouse in the TV window and select Find Channel. You will see your FM radio channels at the end of your channel list.

How can I see the WinTV v8 channel list all the time?

You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v8 window to bring up Find channel. You will see the Channel list (see picture below).

In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v8 window.

Keyboard shortcuts

• Ctrl A Aspect ratio
  Ctrl D Display the video and audio format of the TV program
  Ctrl F Freeze the video
  Ctrl Z Open TV Scheduler
  Ctrl O View program details (digital TV program, where provided in the broadcast)
  Ctrl S Display subtitles
  Ctrl W Full screen toggle
  Alt F Open File menu for playback
  Alt M Open the Task Menu
  Alt P Previous channel
  Ctrl Q Pause
  Ctrl P Play
  Alt R Record
  Alt S Stop
  Alt T Start TV
  Ctrl C Catch up
  Ctrl > Skip ahead
  Ctrl < Skip back

Problems running the WinTV application on Windows Server

If you want to use WinTV on your Windows Server, you may encounter the problem that it won’t recognize any of your DVB devices. This is because there is no BDA support (Broadcast Driver Architecture) on Windows Server 2008 / 2012. So if you want to use BDA based hardware (i.e. DVB TV cards) it is neccessary to add BDA harware support manually.

To fix, see these instructions: https://marcowuen.wordpress.com/2012/08/13/howto-add-bda-hardware-support-to-windows-server-2008-r2/